- This OBD2 scanner the only diagnostic scanner in this price range that supports the CAN-FD protocol that is compatible with the latest GM vehicles manufactured after 2020, which can run faster than other products to greatly enhance the user experience. Unlock the protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019.
- ThinkDiag2 is an OE-Level Bluetooth diagnostic tool that supports full system diagnosis. It supports read/clear codes, datastream, actuation tests, special functions, coding, adaptation, and read control module information for all systems, such as ECM, ABS, SRS, TCM, EPB, TPMS, SAS, A/C, BMS, etc. The specific functions that can be performed may vary by car model. Free software updates and usage are available for 1 year, paid subscription is required to use the model software after expiration.
- A Bi-directional control diagnostic tool that supports actuation tests, drives solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls, making it easy to operate and saving a lot of time to identify the cause of the fault. In addition, it supports ECU CODING which allows you to match replacement components to the ECU. It also can activate the hidden functions for some BMW, VW, AUDI, and BENZ models.
- Thinkdiag2 OBDII code scanner is designed for individual car owners, DIYers, and small repair shops, which has a separate menu of 15 common special functions, such as Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, IMMO matching, TPMS reset, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Maintenance functions that each car can do may be different.
- The 2022 newest diagnostic scanner has an Auto-VIN function, it can help car owner/repair stores automatically and quickly identify the year of manufacture, model, and VIN of most models, then enter the vehicle diagnostic menu. Then you can click ‘Health Report’ for a complete vehicle system scan, which will automatically generate a detailed vehicle health report after diagnosis. Reports and diagnostic records can be viewed in the REPORT and HISTORY menu, and reports can be shared and printed.
- Thinkdiag2 is a upgarde of Thinkdiag car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, EVAP system test, and retrieve vehicle information. It also supports viewing and recording the data stream in detailed text or combined 4 in 1 graph, so that convenient for analyzing abnormal parameters and better monitoring vehicle performance.
- Supports up to 120+ car brands. Compatible with OBDII protocols, like ISO 11898-1:2015 (CAN-FD), IOS 15765-4 (CAN), etc. Supports most vehicles manufactured after 1996 that use the OBDII protocol. Only support 12V cars, including gasoline cars, diesel cars, and some new energy cars. If you are not sure whether the functions work on your car model, please provide your car’s model, the year of manufacture, the country of manufacture, and which functions you want to do and we will confirm for you.
- Most Bluetooth products on the market need to be used with 3rd-party applications, with lots of disadvantages like unstable connections, few free functions, etc. Thinkdiag2 has an exclusive app “ThinkDiag+”. Compatible with Android and IOS systems, equipped with Bluetooth5.0BLE dual-mode, stable transmission, and faster processing speed. Match a 23inches long DB15 three-row to OBDII 16pin diagnostic cable, which makes communication faster, unplugging equipment, and operation more convenient.
- Thinkdiag2 has blue/red/green double-sided signal indicators, which are convenient to identify communication status. The shell is designed with soft rubber that is wear-resistant and anti-drop. Supports 10 languages, including English, French, Spanish, German, Italian, Portuguese, Japanese, Russian, Turkish, and Polish. the diagnostic language of the APP will change automatically according to the phone language. But only the Android system supports manual language switching inside the settings.
- The cost-effective scanner you deserve! Equipped with an EVA storage bag, not only to provide multiple protection but also more convenient to carry and save. It supports online feedback, online upgrades, and reports print. some VW and Audi models support a guidance function that guides customers to do some functions operations. Repair Info within the toolbox aims to provide vehicle diagnostic tutorials, and only the special functions of some models of GM and Ford have tutorials playback videos.
From the manufacturer
Turn Your Smart Device Into A Professional Technician’s Diagnostic Tool!
· CANFD Protocol+ FCA AutoAuth+ 120 Car Brands: Thinkdiag2 professional scan tool supports most car models after 1996 year of 120+ car brands, added the CAN-FD protocol, which supports the newest (2020-2021) GM vehicles, and Autotuth can unlock the protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019.
· Bidirectional Control/Actuation test: Thinkcar thinkdiag2 car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle’s controls.Such as: turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior & exterior lights, sound horn, test door lock actuators and such.
· ECU Coding: For customize your car, unfold the hidden features, or disable the annoying functions(turn off the back up beep, turn the seat belt buzzer off); Re-identify the adaptive data for certain components after repairs or replacements. (NOTE: DO NOT Support ECU reprogramming)
· 15+ Reset Functions: Along with all the common maintenance functions, such as ABS Bleeding, Key Programing, Injector Coding, Oil Reset, DPF Reset, BMS Reset etc.
Key Fob Programming/Key Coding/Key Matching: Thinkcar thinkdiag2 supports Add, Delete & Reprogram Keys and supports PIN Code reading for most cars before 2008 ,for vehicles after 2008,you need to have PINCode to do key programming).
· System-wide Diagnosis: Thinkdiag obd2 scanner supports read all vehicle systems (including ENG, ABS, SRS, ABS, AFS, EBD, TCS, chassis, body and electric and electronic equipment system, etc.) of the error code, cleanup code, read the data flow, the freeze frame. It can also perform all the commands that a mechanic needs, to know the product problem whether caused by car’s electrical wiring or car’s component.
AutoVin & Auto Scan: Automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.
· Tips: Internet connection is recommended when using it. Some functions may not be available or diagnostic result error without connecting network.
ThinkDiag2 Has 15+ Maintenance Reset Functions.
· Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
· TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
· IMMO Matching: In order to prevent the car from being used with illegal keys, the anti-theft key matching function enables the immobilizer control system on the car to identify and authorize the remote control before the car can be used normally.
· Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
· SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
· Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
· ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
· ETS Learning: Initializes the throttle actuator to restore the “learning” values stored on the ECU to their default state.
· DPF regeneration: Generally, DPF regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the DPF regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
· Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
· Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
· EGR Adaption: This function can be used for self-learning after EGR (Exhaust Gas Recirculation) valve cleaning or replacement
· Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
· Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
· Headlight Matching
|
|
|
|
|
|---|---|---|---|
Add CAN-FD Protocol· 2021 Chevrolet Tracker/Suburban/Tahoe · 2020-2021 Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/Onix 1.2L(LIF) · 2021 Cadillac Escalade/Escalade ESV · 2021 GMC YUKON/YUKON XL · 2020 Chevrolet Tracker |
Active TestActive Test can send commands to the vehicle’s systems/components to verify system inputs/outputs without using the vehicle controller, such as testing whether the actuator is normal, turning on the radiator fan, adjusting the throttle, opening/closing windows, operating the rearview mirror. |
ECU CodingECU Coding can reflash the vehicle control module, which allows you to reprogram the adaptive data of certain components after performing repairs or replacing certain components. Often used after personalization customized of the car to perform this function. |
One-Touch AutoVIN TechnologyAuto Scan function supports automatically identifying most car models, year of manufacture, and VIN codes. Just one click full vehicle scan, and will be automatically generated a full system vehicle health report later. Notice: If some car models can not be recognized, you can manually select the model to enter the whole system diagnostic menu. |
All-IN-ONE OBD2 SCANNER ThinkDiag2.
Thinkcar thinkdiag2 is easy to use and an Ideal Choice for: Technician, advanced DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual.
Cover 120+ Car Brands, 10000+ Car Models.
Component Matching: Compatible with Volkswagen / SKODA / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / KIA / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / SKODA / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / SKODA / Seat etc.
Online Parameterization: Compatible with Volkswagen / Audi / SKODA / Seat etc.
IMMO Matching/Key fob Programming: Compatible with Volkswagen / Audi / SKODA / Seat etc.
Guided Functions: Compatible with Volkswagen / Audi / SKODA / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.SCN Coding for Benz.
Supports the diagnosis of Chrysler, Dodge, Jeep, Alfa-Romeo, and Fiat after 2019, but only provides the login entrance of AutoAuth. You need to purchase a registration number from the AutoAuth official website and log in to use it.
Quick Shipping and Professional Packaging
Our long-standing relationship with UPS FedEx DHL and other international carriers allows us to offer a range of shipping services. Our warehouse personnel are highly skilled and will pack your products according to our precise and precise specifications. Your items are carefully inspected and securely secured prior to shipment. We deliver to thousands of clients every day from all over the world. This is a testament to our commitment to be the largest online retailer globally. The distribution centers and warehouses distribution are situated in Europe, as well as the USA.
Note: Orders that contain more than one item are assigned a particular processing period depending on the specific product.
Prior to shipping the items, our staff will carry out a thorough inspection on the products you have ordered. Today, the majority orders will be delivered within 48 hours. The delivery time is between 3 and 7 working days.
Returns
We are not able to manage the stock in our factory and warehouse. This means that the actual stock could change at any time. It is possible that your order will be out of stock when the order has been placed.
Our policy is valid for 30 days. However, if 30 days have passed since you purchased your product, we are unable to give you a refund or exchange.
The item you purchase must be in its original packaging and in good condition. It must also not be used. The item must be returned in the original packaging.
Related products
Automotive
BAFX Products – SPL – Decibel Meter/Sound Level Reader / 30-130dBA Range (Standard) Bafx Products
