Swiitech Bluetooth Transmitter Receiver, 2-In-1 Bluetooth AUX Adapter, V5.0 Bluetooth Adapter for Tv/Car/Speaker/Home Stereo/Pc, Pairs 2 Devices Simultaneously, Aptx Low Latency (TR-01) Swiitech

• 【2-in-1 Bluetooth Audio Adapter】 In TX mode, the Bluetooth transmitter is plugged into non-Bluetooth devices, such as TV/MP3 player, through the AUX/RCA jack, and transmits the audio to the Bluetooth headset/speaker; in RX mode, the Bluetooth receiver can be connected to a wired speaker/car Audio input port and receive audio from smartphone via Bluetooth.
• 【Low Delay of High Fidelity Stereo】 Transmit content without delay in TX mode. It can be connected with Bluetooth speakers or headphones supporting A2DP protocol to form a wireless audio transmission network, which can be applied to TV, CD, home theater and other equipment; It can also be connected with mobile phone / computer to play music. It supports SBC, apt-X, aptx-ll (Texas), fastream (Texas) and other codecs
• 【Stable Connection and Easy to Carry】Using the latest mature Bluetooth chip and well-designed software, the compact Bluetooth adapter is small in size and light in weight, which is not only easy to carry, but also brings you a CD-like listening feast.
• 【18 Hour Service Time】 The charging time is about 2 hours (charging input requirements: 5V DC ≥ 300mA). It can be used continuously for 18 hours when fully charged. When it is in low power state, the adapter can be plugged into the power supply for charging while working.
• 【Dual Pairing Mode】 In TX mode, two stereo Bluetooth speakers or stereo Bluetooth headsets can be connected at the same time and two speakers/headphones can make sound at the same time; in RX mode, two mobile phones with Bluetooth function can be connected at the same time.

How to Use

How to Use—Pairing in TX mode:

 

1. Set the adapter to TX mode and connect it to your Non-Bluetooth device (television, music player, etc…) using a 3.5 mm audio cable/plug. Insert one end into the audio port of the adapter, and the other end into the audio out jack of the Non-Bluetooth device.
2. Place your Bluetooth audio receiving device, (earphones, speakers,etc…) within a 3 feet/1 meter range and power it on. Set it to pairing mode.
3. Press and hold the adapter’s power button for 3 seconds to turn it on. Tap the power button twice to enter pairing mode (the light will flash red and blue). After approximately 10 seconds, pairing will complete.
4. After the connection is successful, the blue indicator light will remain on.

 

 

• NOTE: A 3.5 mm female to 2 RCA male cable is suitable for connecting the adapter to a TV without a 3.5mm audio output jack. This cable is included in the package.

 

How to Use—Pairing in RX mode:

 

1. Set the adapter to RX mode and use a 3.5mm audio cable/plug inserted into the audio port of the adapter. Insert the other end into your Non-Bluetooth audio receiving device (speakers, headset, etc…)
2. Press and hold the adapter’s MFB button for 3 seconds to turn it on. Tap the power button twice to enter pairing mode. The adapter’s light will flash red and blue.
3. Activate the Bluetooth function on your transmitting device (phone, tablet, etc…) and search for nearby Bluetooth devices.
4. Find “TR-01” in the search results and tap on it to connect. Once connected, the LED indicator on the adapter will turn solid blue.

 

18 hour service time The charging time is about 2 hours (charging input requirements: 5V DC ≥ 300mA). It can be used continuously for 18 hours when fully charged. When it is in low power state, the adapter can be plugged into the power supply for charging while working.	Product Diagram   1. Volume – / Previous Track (RX Mode) 2. Volume + / Next Track (RX Mode) 3. Transmitter (TX) / Receiver (RX) Mode Switch 4. LED Indicator 5. Power Button 6. Charging Port 7. 3.5mm Audio Port	Bluetooth 5.0 Bluetooth: 5.0 Operation Range: Up to 10m (without any blocking objects) Using the latest mature Bluetooth chip and well-designed software.